Vehicle Compatibility
Confirm the target vehicles use a compatible GB/T DC inlet and fall within the available voltage range.
GBT DC Charger
GB/T DC connector configuration for compatible Chinese-standard electric vehicles
Available in 40kW to 240kW floor-mounted commercial configurations
DC200–1000V output range supports different vehicle battery platforms
GB/T configuration supports a compatible 12V auxiliary power supply
Two charging connectors standard with project expansion up to four
Standard five-meter air-cooled cable with optional length and cooling upgrades
IP54 enclosure supports indoor and outdoor commercial charging projects
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
GB/T Commercial DC Charging
Match the Charging Protocol, Auxiliary Supply and Vehicle Platform
A GBT DC Charger supplies controlled direct current through a GB/T DC connector to compatible electric vehicles. The charger and vehicle exchange charging requirements before energy transfer begins, allowing the output to follow the vehicle battery-management system within configured limits.
NEWCOM's floor-mounted platform offers 40–240kW power selections, DC200–1000V output and a GB/T-compatible 12V auxiliary power configuration. The ordered model must be matched to the actual vehicles, site input supply and charging-bay plan.
40–240kW Selectable rated power
DC200–1000V Wide output-voltage range
12V Compatible GB/T auxiliary supply
IP54 Indoor or outdoor cabinet
Charging Begins Only After Vehicle Confirmation
The vehicle and charger coordinate before and during power delivery.
1
Physical connection
The GB/T charging connector is correctly connected and locked.
2
Vehicle communication
The charger exchanges operating information with the vehicle system.
3
Output adjustment
Voltage and current follow the vehicle request within charger limits.
4
Session completion
Power delivery stops before the connector is safely released.
Selection Priorities
Four Decisions That Shape a GB/T Charger Configuration
The interface standard is one part of the project. Rated power, connector quantity, cable construction and network operation must also be defined.
Power Demand
Use vehicle charging limits, dwell time and daily traffic to select a practical charger rating.
Connector Layout
Specify single, dual or multi-gun operation and how total cabinet power should be distributed.
Site Integration
Confirm incoming power, installation environment, networking, access control and platform requirements.
Available Series Data
GBT DC Charger Technical Specifications
Specifications apply to the configurable NEDF commercial floor-mounted platform. Model-specific output limits and operating functions should be stated in the approved order specification.
| Category | Item | Available Specification |
|---|---|---|
| AC input | Voltage range | AC380V ±20% |
| AC input | Connection | 3P + N + PE |
| AC input | Operating frequency | 45–65Hz |
| Electrical | Power factor | ≥0.95 under normal output power |
| DC output | Rated-power options | 40 / 60 / 80 / 120 / 160 / 180 / 240kW |
| DC output | Voltage range | DC200–1000V |
| DC output | Series output current | 0–300A; final limit depends on the selected configuration |
| GB/T configuration | Auxiliary power supply | Compatible with 12V |
| Charging interface | Connector standard | GB/T DC connector configuration |
| Charging interface | Standard connector count | 2 charging connectors |
| Charging interface | Multi-gun support | Project configurations can support up to 4 connectors per unit |
| Cable | Standard length | 5m; optional length upgrade available |
| Cooling | Cable cooling | Air cooling as standard; liquid cooling optional |
| Environment | Operating temperature | -20°C to 50°C |
| Environment | Storage temperature | -40°C to 85°C |
| Environment | Humidity | 5–90% RH, non-condensing |
| Environment | Altitude | ≤2000m |
| Installation | Cabinet type | Floor-mounted; indoor or outdoor use |
| Enclosure | Protection level | IP54 |
| Management | Operation and service | Remote operation and service support |
| Customization | Project support | OEM, ODM and custom design available |
The approved configuration should identify rated output, maximum current per connector, connector quantity, power-allocation method, cable assembly, platform functions and destination requirements.
Quotation Inputs
Provide Project Data Before Selecting the Model
Vehicle and site information allows the charger configuration to be assessed as a complete system rather than as a connector-only purchase.
- Vehicle models Confirm GB/T inlet type, battery voltage and accepted DC power.
- Charging schedule State daily volume, peak arrivals and available dwell time.
- Electrical supply Provide site voltage, transformer capacity and other major loads.
- Bay arrangement Identify connector quantity, parking positions and required cable reach.
- Operating method Define user access, networking, payment and platform requirements.
Passenger EV Charging
Match output to the battery platforms and charging limits of the intended passenger-vehicle mix.
Taxi Fleet Depots
Use vehicle return schedules and shift changes to determine charger quantity and output power.
Logistics Fleets
Coordinate charging with loading cycles, route duration, available parking and overnight dwell time.
Bus Charging Sites
Confirm vehicle charging acceptance, battery size, cable reach and available site power before selection.
Public Charging Hubs
Dual or multi-gun arrangements can improve bay availability where multiple GB/T vehicles arrive together.
Highway Service Areas
Higher-power models require compatible vehicles, sufficient grid capacity and a suitable cooling configuration.
Project Configuration
Confirm the Interface, Power Distribution and Operating Functions
These items should be finalized before production to reduce changes during installation and vehicle commissioning.
Charging Hardware
- GB/T DC connector configuration
- Single, dual or multi-gun layout
- Standard or extended cable length
- Air or optional liquid cooling
- Output current requirements
Power and Site Conditions
- Required rated power
- AC380V input compatibility
- Transformer capacity
- Simultaneous charging demand
- Indoor or outdoor installation
Operation and OEM
- Remote operation requirements
- Charging-platform integration
- User access and payment method
- Cabinet branding
- Interface-language requirements
GB/T compatibility must be checked against the actual vehicles.
Send the vehicle models, battery voltage, accepted charging power, required connector quantity, site input conditions and operating requirements.
Order Process
From Vehicle Requirements to Shipment
Submit Project Data
Provide the vehicle list, required power, connector quantity, site supply, destination and order quantity.
Match the Configuration
Review voltage, current, auxiliary supply, cable, cooling and simultaneous output requirements.
Approve Order Details
Confirm model-specific parameters, operating functions, OEM details and commercial terms.
Inspect and Ship
Coordinate inspection, packaging, delivery destination and local installation responsibilities.
Buyer Questions
GBT DC Charger FAQ
Which vehicles can use a GBT DC Charger?
The target vehicle must have a compatible GB/T DC charging inlet and operate within the charger's configured voltage and current range. Provide the vehicle models before ordering so compatibility can be reviewed.
What power ratings are available for the GB/T configuration?
The commercial floor-mounted platform offers 40kW, 60kW, 80kW, 120kW, 160kW, 180kW and 240kW configurations. Selection depends on vehicle acceptance, grid capacity and operating demand.
Does the GB/T configuration include a 12V auxiliary power supply?
The available GB/T configuration supports a compatible 12V auxiliary power supply. The complete electrical and communication configuration should be confirmed for the intended vehicles.
Can two GB/T vehicles charge from one cabinet?
Yes. The standard commercial platform supports two charging connectors. Maximum output per vehicle and simultaneous power distribution depend on the ordered charger configuration.
Can the charger support more than two charging connectors?
Project configurations can support up to four charging guns per unit. Connector arrangement and power allocation should be reviewed against the site's simultaneous charging demand.
Is the GBT DC Charger suitable for outdoor installation?
The floor-mounted series has an IP54 enclosure and supports indoor or outdoor operation from -20°C to 50°C. Local installation must also address foundation, drainage, electrical protection and service clearance.
Can cable length and cooling be customized?
The standard cable length is 5m, with length upgrades available. Air cooling is standard, while liquid cooling is optional for suitable higher-demand configurations.
What information is needed for a GBT DC Charger quotation?
Include vehicle models, battery voltage, accepted DC power, required charger rating, GB/T connector quantity, site input supply, simultaneous charging demand, cable length, quantity, destination and OEM requirements.
Configure the GB/T Charger Around the Actual Vehicle Fleet
Send the vehicle models, battery voltage, accepted charging power, transformer capacity, connector quantity, operating requirements, destination and purchase quantity.
Get a GB/T Charger QuoteHot Tags: gbt dc charger, China gbt dc charger manufacturers, suppliers, factory, charger station ev 22kw wall mounted column, Dc Fast Charger For Home with Color Display, ev charger charging station, ev fast wall car charger box, gbt ev charge with credit card payment, wallbox dc charging station
