Electric Vehicle Charging Station, Charging Pile Use Tips!

1. Overcurrent protection function
When the external load is too large and the current exceeds the rated value by 15%, the background system will automatically cut off the power.
Zero current shutdown functionWhen the charging is completed and the current is reduced to 0.5 amps, the background system automatically shuts down to prevent the user from not actively shutting down. Finally, if a fault occurs, there is also an "emergency stop button" next to the car charging pile.
Q: Is the charging tip always charged?
The gun head of the charging pile is not charged when it is not started, only the gun head and the port of the car body are completely consistent, and the power will be generated after passing the identity authentication of the pile and the gun.
Q: What should I do if the charging pile fails?
The charging pile has a series of protection functions, as follows
1. Charging pile signal guidance function: charging pile and vehicle connection charging to complete the guidance signal, only under normal connection can start charging, in the charging process, the signal changes, cut off the output switch within 80 milliseconds to stop charging.
2. The role of the two-way switch
The output circuit of the charging pile adopts a dual-way switch, and when the charging is stopped, the dual channels are disconnected, which can realize complete physical isolation of charging and input.
Q: When charging starts, it shows that it is faulty and cannot be charged?
Generally, the inability to charge may be caused by improper operation of a certain step, and the vehicle needs to be turned off when preparing to charge (PS: some models of new energy vehicles need to be locked after the car), and the charging gun and the vehicle need to be docked well when the gun is inserted and the gun snap sound should be heard.